Scada and siemens

EDAboard.com Forum Index -> Robotics and Automatics Forum -> Scada and siemens

Author

Message

Moof

Joined: 21 Nov 2003
Posts: 154
Helped: 6
Location: Argentina

23 Apr 2005 17:36 cp 5611 driver support

Can i use national instrument to make a sacada with a cp 5611 profibus card?
I dont want to buy wincc to make it!!

libexec

Joined: 12 May 2005
Posts: 4

12 May 2005 19:27 scada profibus driver

I think that what he's asking is "Does NI's SCADA have a PROFIBUS driver compatible with SIEMENS CP5611?

You have other choices other tha WinCC, depending on the needsof your application. WinCC is a VERY complete system, may be you need something simpler.

¿Do you know the new version? WinCC Flexible.

I work at a SIEMENS automation distributor here in Argentina, in Bariloche.

Kind regards

Nahuel

swilly

Joined: 09 Oct 2001
Posts: 44
Location: Argentina

08 Jul 2005 2:13 cp 5611 siemens

Hi.
I need to do a simple aplication (10 tags only) and I don't want to buy WinCC.
The PLC is S5-95U.
Which options I have?

fuat

Joined: 23 May 2003
Posts: 2

01 Dec 2006 2:01 scada siemens

Hello Swilly,
Wincc is generally for S7 series PLC's. So a WinCC soft which has min. tags, 128. 10 tags may only be in mind Smile

wcardoso

Joined: 09 Jan 2002
Posts: 23
Helped: 1

13 Jan 2007 20:42 purchase wincc 6.0

Use any development software you're familiar with and who can work with DLL files. Then use Prodave (a dll files set) to communicate with S5 or S7 devices.
Good luck:D

NguyenDuy

Joined: 13 May 2007
Posts: 6

13 May 2007 9:35 scada pour siemens s7

With 10 tag, you can use VB for control & supervisory.
WinCC is sell by tag

dhinakaran

Joined: 28 May 2007
Posts: 1

28 May 2007 13:18 siemens scada wincc

Hi all

I am trying to communicate Siemens S7 with Movicon SCADA... through Profibus DP... I am unable to do it. As per the procedure we need to set the Station Setting conguration for the CP5611 card through "NCM Manager wizard" which I am not able to find.... only after these settings are done I need to create a "Access Point" for the card which I will call from the SCADA... any one can help out....?

I am also attaching the steps required for configuration....

Currently i am communicating through MPI mode...

Sorry, but you need login in to view this attachment