electronics forum

Rules | Recent posts | topic RSS | Search | Register  | Log in

Fixing of the balance point for CTS
Post new topic  Reply to topic    EDAboard.com Forum Index -> ASIC Design Methodologies & Tools (Digital) -> Fixing of the balance point for CTS
Author Message
mvvijay78



Joined: 31 Oct 2001
Posts: 75
Post17 Dec 2004 6:57   

Fixing of the balance point for CTS
Hi,
How do i fix the balance point for CTS if the IC i am working on has three clock source all going to a mux and based on some logic only one of these are to be distributed to all the blocks.Should i start the balance pont at the output of the MUX or how should be the approach.
Also note that all the three clock source have different frequencies.
Regards
Vijay
Back to top
Google
AdSense
Google Adsense
Post17 Dec 2004 6:57   

Ads


Back to top
haosg



Joined: 25 Nov 2004
Posts: 103
Post17 Dec 2004 9:17   

Re: Fixing of the balance point for CTS
Two ways;
1. create clock in mux's output pin, selest highest frequency of three clocks.
2. create 3 clocks in input ports. Astro can handle multiple clocks. it would make
comman path that multiple clocks share optimisim.
Back to top
Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
Post new topic  Reply to topic    EDAboard.com Forum Index -> ASIC Design Methodologies & Tools (Digital) -> Fixing of the balance point for CTS
Page 1 of 1 All times are GMT + 1 Hour
Similar topics:
whats the preferred choice of buffers for CTS? (2)
which is the best tool for CLOCK TREE SYNTHESIS-(CTS) (23)
I need some training material about Magma CTS or Astro CTS ~ (2)
How to compute the power comsumed by the balance resistor (2)
Measuring the impedance of the balance port of balun chip (2)
Possible to have the IIP3 point < P-1db point? (4)
who knows the format of cts in the astro? (5)
do i need to balance the skew (6)
Theoritical basics of the harmonic balance (3)
Methods for fixing EM violation???????? (6)


Abuse || Administrator || Moderators || Support us || sitemap
topic RSS